Designed for workshops, classrooms, and site offices.
Flow is TOP → BOTTOM, easy to follow for trainees & electricians. Residential & Commercial Building
Lesson 1 SITE STUDY & PLANNING
A. Study electrical drawings
B. Confirm load requirements
C. Identify power source
D. Check local electrical codes
E. Plan material & manpower
Lesson 2 TEMPORARY SITE POWER
A. Install temporary distribution board
B. Provide earthing for temporary supply
C. Arrange extension cables & sockets
D. Ensure safety signage
Lesson 3 MARKING & LAYOUT
A. Mark switch locations
B. Mark socket & power points
C. Mark light fixture positions
D. Mark DB / panel locations
E. Verify with drawings
Lesson 4 CONDUIT & BOX INSTALLATION (ROUGH-IN)
A. Install conduits (PVC / GI)
B. Fix junction boxes
C. Fix switch & socket boxes
D. Provide fan & ceiling boxes
E. Secure conduits with saddles
Lesson 5 EARTHING SYSTEM
A. Install earth electrode
B. Construct earth pit
C. Lay earthing strip / wire
D. Connect earth to DB & panels
E. Check earth continuity
Lesson 6 CABLE / WIRE PULLING
A. Pull phase, neutral & earth wires
B. Maintain color coding
C. Avoid sharp bends & damage
D. Tag & identify circuits
E. Keep spare wire length
Lesson 7 DISTRIBUTION BOARD / PANEL WORK
A. Fix distribution board
B. Install MCB / MCCB
C. Install RCCB / ELCB / RCBO
D. Connect phase, neutral & earth
E. Label all circuits
Lesson 8 SWITCH & SOCKET INSTALLATION
A. Fix switches
B. Fix socket outlets
C. Install fan regulators
D. Fit switch plates
E. Tighten all terminals
Lesson 9 LIGHTING & FIXTURE INSTALLATION
A. Install light fixtures
B. Install fans & exhaust fans
C. Install outdoor & emergency lights
D. Connect appliances & power points
E. Check mounting & alignment
Lesson 10 SPECIAL & LOW-VOLTAGE SYSTEMS
A. Install CCTV wiring
B. Install fire alarm system
C. Install data & communication cables
D. Install access control systems
E. Test low-voltage circuits
Lesson 11 BACKUP & POWER SYSTEMS
A. Install inverter / UPS
B. Install generator connections
C. Install changeover / ATS
D. Connect batteries
E. Verify safety interlocks
Lesson 12 TESTING & COMMISSIONING
A. Insulation resistance test
B. Continuity test
C. Earth resistance test
D. Load testing
E. Rectify faults
Lesson 13 ENERGIZING & FUNCTION CHECK
A. Switch ON supply
B. Check voltage & current
C. Test lights, sockets & equipment
D. Monitor panel operation
E. Ensure no overheating
Lesson 14 SAFETY & IDENTIFICATION
A. Fix danger boards
B. Label DB & panels
C. Mark circuits
D. Secure covers & enclosures
E. Ensure fire safety compliance
Lesson 15 HANDOVER & MAINTENANCE
A. Submit test reports
B. Provide as-built drawings
C. Hand over warranties
D. Explain system operation
E. Schedule maintenance
⚡ GOLDEN RULES (DISPLAY AT BOTTOM)
1. POWER OFF BEFORE WORK
2. EARTHING IS MANDATORY
3. TEST BEFORE ENERGIZING
4. SAFETY FIRST – ALWAYS.
